Reporting to the MAX including Point of Sale and Non-profit Versions
Tech Tip
|
Question:
The receipt tape prints out "letter size" (11 inches long)">
Reporting to the MAX including Point of Sale and Non-profit Versions
Tech Tip
|
Question:
The receipt tape prints out "letter size" (11 inches long), even
when only one or two items have been sold. How can I make it
print shorter?
Answer:
Windows 2000 uses a different method for selecting the
minimum form length used for print jobs than was previously used
in Windows 98. Instead of the form length being ignored by
setting the printer to Continuous Feed With no Break, it is
necessary to create a custom form for Windows 2000 or XP to use
with the Receipt Printer. If a custom form is not created and
selected on the print driver, the receipt will always print out
a minimum of 11 inch of paper.
Resolution
A custom form will need to be created and assigned to the
printer.
To Create the Custom Form for Receipt Tape:
1. Open the Printers folder by selecting Start, Settings,
Printers and Faxes.
2. Select File, Server Properties from the top menu of the
window. The Print Server Properties form should appear.
3. On the Forms tab, put a check in the box next to Create a new
Form.
4. In the Form Name field, type in Receipt Tape.
5. In the Form description section, enter 3.00 in for the Width
and 5.00 in for the Height.
6. Click OK at the bottom of the form to create the custom form.
Assign the short form to printer
1. Right click on the printer you want to print the short forms
and choose properties
2 .Click on the general tab
3. Click on the printing preferences button
4. Click the advanced button
5. Next to paper size, choose the name of the form we set up in
step 2
6. Click ok, click ok. You should be back to the printer
properties
7. Click on the advanced tab
8. Click on the printing defaults button
9. Click the advanced button
10. Next to paper size, choose the name of the form we set up in
step 2
11. Click ok, click ok. You should be back to the printer
properties
12. Click on the printing defaults tab
13. Next to the option that says continuous feed-no break change
the paper size to the form we set up previously.
14. Click ok
15. Close the printers window
More Information
If the Point of Sale Receipt Tape format in Reporting to the MAX
Point of Sale has been modified to eliminate many of the default
lines that print on the receipt, the receipt may still print up
to 1 inch too long. If this occurs, try using these instructions
with a form Height of 4.50 inches instead of 5.00 in.
|
| |
| |
|
| |
