Question:
Receipts in the Point of Sale module are printing too long.

Answer:
 

Cause

Windows 2000 uses a different method for selecting the minimum form length used for print jobs than was previously used in Windows 98. Instead of the form length being ignored by setting the printer to Continuous Feed With no Break, it is necessary to create a custom form for Windows 2000 or XP to use with the Receipt Printer. If a custom form is not created and selected on the print driver, the receipt will always print out a minimum of 11 inch of paper.

Solution

A custom form will need to be created and assigned to the printer.

To Create the Custom Form for Receipt Tape:

• Open the Printers folder by selecting Start, Settings, Printers and Faxes.
• Select File, Server Properties from the top menu of the window. The Print Server Properties form should appear.
• On the Forms tab, put a check in the box next to Create a new Form.
• In the Form Name field, type in Receipt Tape.
• In the Form description section, enter 3.00in for the Width and 5.00in for the Height.
• Click OK at the bottom of the form to create the custom form.

Assign the short form to printer

• Right click on the printer you want to print the short forms and choose properties
• Click on the general tab
• Click on the printing preferences button
• Click the advanced button
• Next to paper size, choose the name of the form we set up in step 2
• Click ok, click ok. You should be back to the printer properties
• Click on the advanced tab
• Click on the printing defaults button
• Click the advanced button
• Next to paper size, choose the name of the form we set up in step 2
• Click ok, click ok. You should be back to the printer properties
• Click on the printing defaults tab
• Next to the option that says continuous feed-no break change the paper size to the form we set up previously.
• Click ok
• Close the printers window